tesasax.blogg.se - Drives all listed as lsi megasr

#Drives all listed as lsi megasr serial number

PRTG shows some of the alerts as reported by the monitored device via SNMP using lookups.

#Drives all listed as lsi megasr serial number

If a disk is replaced, please re-deploy the sensor (re-run the auto-discovery) or update the serial number in the Identifier field within the sensor's settings.

The Physical Drive sensors identify disks based on the serial number.

This means that if a predifined threshold is crossed, the sensor will go into warning/error and will only leave the error/warning state when the limits are manually adjusted in the channel settings of the corresponding channel.

For the sake of simplicity, the Error Count (Media), Error Count (Other) and Predictive Fail Count are measured as absolute values and not as delta/difference readings.SNMP must be enabled and the device must support the LSI-AdapterSAS.mib.Because the device template relies on the auto-discovery process, the device you want to monitor needs to be reachable via PING.The sensors implement default alerts whenever possible, but you can still fine-tune most channels by defining additional limits in the sensor channels settings or modifying the lookups included by default.

The device template creates the available and compatible sensors based on the data at hand. The sensors can monitor the following if the data is available: You can use the device template that we provide below to automatically create custom sensors with the PRTG auto-discovery. Adding Custom Sensors using the Auto-Discovery + Template The sensors will report the virtual drive's status based on the lookup files.

While there are no physical/virtual drive sensors in PRTG for LSI powered RAID Controllers, I've put together a couple of lookups and a device template, which can be used to automate the deployment of these sensors using auto-discovery. This article applies to PRTG Network Monitor 16.3.25 or later Monitoring LSI/Broadcom RAID Drives (Physical and Logical)